How to Set Up Your Car’s Surround Sound Audio System

It has been decades already that people with mobile electronic systems in their vehicles, particularly car stereos, have pushed it to the limit in order to achieve the best sound quality. Once before our grandparent have cars and static-filled and bulky AM radios. Then, these gave way to cassettes and playing the stereo FM broadcasts used in our parents' cars. Today, car manufacturers offer digital mobile electronic systems that use CD players and even satellite radio that has MP3 playing compatibility.

Then, the car audio is further enhanced by surround systems zvučnika.Koncept behind this explanation is that all the speakers inside your vehicle set up a surround sound audio system that brings the sound experience from the movie theater in the living room.

Want to learn how this experience of sound, also in the car? Here are things you should do:


1) The first thing to check off in your list is to find the stereo head unit, which will allow you to wiring in a processor for surround sound. Your processor will be digital, of course, such as the head unit must have a digital signal. Then, you have cables that are fiber optic. They are used in transmitting digital signals between each component you use. If you happen to buy a good head unit, but may not provide a digital signal, you can still use the CD changer that has a fiber-optic connections.

The processor must be connected to the CD changer. Remember though that if you play a CD, it would not be surround sound system through this device. You can change this by selecting the surround processor switches RCA signals and converts them into digital.

2) Your car must be equipped with some high-end DVD player and / or CD changer that plays the software carrying surround - sound.

3) Install a five-channel amplifier that has the ability to provide enough power for the front speakers, rear speakers and subwoofer. Every nook and cranny of your vehicle and the subwoofers has separate channels.

4)Your center channel must have a tweeter and midrange speaker of about 4 to 6 inches. This combination must have its very own contribution. It should also be located in the central part of the vehicle panel.

5) Then, you start installing an amplifier for it to run the center channel speaker. After a two-channel amplifier that he played bridged mono can be okay. However, it should contain electronic crossover that can be built into the motor or amplifier.

6) Start installing your speakers in all four corners of your car. Newer cars have been the place for speakers who are working for the surround sound setting. However, if you have an older car, you may need to have a little imagination and do some work. You add a tweeter up high on a pole at least the amount ramena.Midrange speakers can be used in the factory made ​​a hole in your car door.

7) When all speakers are in place, set the electronic crossover for a course through the central channel. Do not play the full range but opt for around 80 Hz and to get optimum sound quality.

Once you've installed everything, start adjusting your system to find the volume and sound quality that is perfect for you. You can do this by playing around the amplifier gains and the surround sound processor for the type of tuning you want.